0.5Mm Thick High Temperature Food Grade Silicone Rubber Sheets
1. silicon rubber sheet for heat press brief introduction
Material: 100% Virgin Silicone Rubber
Surface: Smooth/Smooth, Smooth/Fabric Impression
Tensile Strength: 7-12Mpa
Temperature : -60° C~+260° C
Hardness: 15, 20, 30, 40, 50, 60, 70, 80+/-5Shore A
Elongation: 330%-760%
Density: 1.25-1.30g/cm3
Tear Strength: 26-42N/mm
Thickness: 0.1-30mm
Width: 0.5-3.8m
Length: 5- 20m
Grade: Industrial Grade, Food Grade
Standard size: 1-8mm x 1m x 10m, 1-8mm x 1.2m x 10m, 10-30mm x 1m x 1m, 10-30mm x 1.2m x 1.2m etc.
2. silicon rubber sheet for heat press Rubber Type including:
Natural rubber / SBR, Neoprene, NBR, EPDM, Butyl, Sillicon, Viton.
Colour any colour per your specific requirement. (black, green, red, white, grey, or others).
Insertion
rubber sheeting with one or two / multiple plies are also available
special purpose rubber sheet available on customize basis.
3. Characteristic silicon rubber sheet for heat press :
Natural Rubber Sheet: High flexibility, good comprehensive physical mechanic performance.
SBR Rubber Sheet: Better wear-resistant and anti-aging function than NR, low prices.
Neoprene Rubber Sheet: Good climate resistant, ozone proof, hot resistance and chemical resistant.
NBR Rubber Sheet: Good oil-resistant, wear-resistant and anti-aging.
EPDM Rubber Sheet: Good anti-aging, ozone proof, polar liquid resistant, good electric performance, lightest rubber.
Butyl Rubber Sheet: Low permeability, good anti-aging.
Sillicon Rubber Sheet: Excellent oil and fats resistance and for high temperatureup to 260. High resistant one can reach to 250 -270 C.
Viton Rubber Sheet: For high temperature up to 300 C.
Packing by plastice film or weaver bags( P. P bags), See below photo:
Copyright © 2019 Nanjing Skypro Rubber & Plastic Co., Ltd. | All Rights Reserved